freeBIM / ASI (inoffiziell)

acceptance
physical receipt of a work or endorsement of a power

contruction year
year of contruction

surface topping/covering
floor covering - with or without

Description
Optional description, provided for exchanging informative comments.

Identifier
An identifier is an alphanumeric string which allows an individual thing to be identified. It may not provide natural-language meaning.

Gross Area
Total area of the ramp flight (not the projected area). Openings, recesses and projections are not taken into account. Only given, if the ramp flight is prismatic.

Gross Volume
Total gross volume of the ramp flight. Openings, recesses, and projections are not taken into account.

Widht
Thickness of the ramp flight. It should only be provided, if it is constant.

disposal method
form of disposal

waste disposal costs
costs involved in wast disposal

constructor
person who installed the device

Counter Slope
Sloping angle of the object, measured perpendicular to the slope - relative to horizontal (0.0 degrees). Actual maximum slope for the passageway measured perpendicular to the direction of travel according to the current design. The shape information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the shape properties, provided in the attached property, the geometric parameters take precedence. Note: new property in IFC4.

begin of warranty
starting date of warranty

warranty period
duration / period of the warranty

end of warranty
end date fo warranty

GlobalId
Globally unique identifier

manufacturer
information on the manufacturer

date of commissioning
date of first usage

installation date
date of installation

inventory number
a code that identifies the inventory/component

acquisition
information: acquisition yes or no

Norm zur Ermittlung der Projektkosten bzw. des Honorars für Architekten und Ingenieure. Kennzeichnung der Kostengruppe
standard to determine the project cost and the honorarium for architects and engineers. Indentifying the type of cost

Length
Total length of the ramp flight along the walking line.

height of ramp flight

leasing
information: leasing yes or no

Clear Width
Actual clear width measured as the clear space for accessibility and egress; it is a measured distance betwen the two handrails or the wall and a handrail on a ramp. The shape information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the shape properties, provided in the attached property, the geometric parameters take precedence.

clear distance to ground/floor
distance from the component to the ground/floor (directly following component in the final expansion)

clear distance to ceiling
distance from the component to the ceiling (directly following component in the final expansion)

supplier
person or company who supplies a customer with googs or services

mass
The Mass is the Property for measuring the mass of a body. amount of matter in an object

rental
information: rental yes or no

mouting
manner of mounting

Name
Optional name for use by the participating software systems or users. For some subtypes of IfcRoot the insertion of the Name attribute may be required. This would be enforced by a where rule.

Slope
Sloping angle of the object - relative to horizontal (0.0 degrees). Actual maximum slope for the passageway according to the current design. The shape information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the shape properties, provided in the attached property, the geometric parameters take precedence.

Net Area
Total area of the ramp flight (not the projected area). Openings and recesses are taken into account by subtraction, projections by addition. Only given, if the ramp flight is prismatic.

Net Volume
Total net volume of the ramp flight. Openings and recesses are taken into account by subtraction, projections by addition.

location in grid
positioning of the object based on a grid

floor/level
Positioning of the object based on levels

building component
building/building section

location in room/room area
positioning of the object in a room/room area

serial number
a unique number, in addition to general material number

service day
service: day of the week and date

PieceMark
Defines a unique piece for production purposes. All pieces with the same piece mark value are identical and interchangeable. The piece mark may be composed of sub-parts that have specific locally defined meaning (e.g. B-1A may denote a beam, of generic type ‘1’ and specific shape ‘A’).

maintenance company
company that performs the maintenance

maintenance intervals
a time period between two consecutive services

maintenance contract number
information for maintenance: contract number